Fillet Weld Gauge

Combined set of gauges to measure concave or convex weld sizes for 3mm to 25mm

The Fillet Weld Gauge allows fast, accurate measurements of eleven (11) fillet weld sizes: 1/8, 3/16, ¼, 5/16, 3/8, 7/16, ½, 5/8, ¾, 7/8, and 1” , and their metric equivalents, to determine weld size, either concave or convex.

 

Each gauge blade is made of 1-1/4” x 4” cold rolled stainless steel to resist rust and bending. Blades are deburred to remove rough edges. All sizes and numerals are etched into the surface and filled for easier reading. The set of seven blades comes in a handy 2” x 4-1/2” pocket case weighing only 4oz.

Place double arc edge flush to the base material so tip touches vertical member. If the tip between the double arc touches the center of the weld, the weld is the profile desired and is the size indicated.

Fillet Weld Gauge is easy to use.

NEW MANUFACTURING PROCESS ALLOWS THIS UNSURPASSED ACCURACY OF ± .005

Gauge blade must be flush to the base material with the tip touching the vertical member. Use the single arc corners for measuring CONVEX welds. Use the double arc corners for determining if the welds are concave, (undersize). If they are, more filler material is required to build weld throat to the size where the tip between the double arcs touch.

Place double arc edge flush to the base material so tip touches vertical member. If the tip between the double arc touches the center of the weld, the weld is the profile desired and is the size indicated.

 

Copyright 2014 JTS-PTA ©