Fillet Weld Gauge

Adjustable Fillet Weld Gauge Model # 3

Used to Measure Fillet Weld and Measure Weld Throat Thickness with a unequal leg measurement feature.

Measure any fillet weld to 1/32" accuracy with just one simple-to-use gauge. Measuring fillet welds used to be a trial with complicated or inaccurate gauges. Not anymore. Now you can measure fillet welds from 1/8" to 1" (with ± 1/32" accuracy) with one economical, simple-to-understand gauge. The adjustable Fillet Weld Gauge uses an offset arm which slides at 45° angle to make fillet weld length measurements. Simply adjust the arm until touches the toe of the vertical leg. The gauge is calibrated to 32nds, with metric equivalents given, so you get more accurate readings. Four screws hold the offset arm in position for future adjustments. This gauge also measures weld throat thickness to 1/16th of an inch by adjusting a pointer until it touches the center of the weld. A thumb screw holds the pointer in position for future reference. If the weld is concave, more filler material can be added to build the weld throat up to standard. The Model 3 Adjustable Fillet Weld Gauge is made of durable, rust resistant stainless steel. Its 2-1/4" x 3" slim design weighs 1-1/2oz., Fits easily into shirt pocket. And because there is just one gauge needed to make all measurements, the chance of losing essential fillet weld gauge blades is eliminated. Fumbling through seven different, inaccurate gauge blades is also eliminated. The Model 3 Adjustable Fillet Weld Gauge measures both leg lengths and weld throat fillet weld thickness.

 

Copyright 2014 JTS-PTA ©