HELP Ceramic Support for Welding

CB 200 Series

Single-Sided Welding : Weld more efficient without gouging, grinding, re-welding or rework! To make sure that every drop of weld metal deposited stays deposited, use our "Non-Metallic Weld Backing" In heavy metal fabrication welding conditions are never the same. Weld joint fit-ups to provide optimum (root) weld conditions are difficult and often impossible for all practical purposes. Our Ceramic Weld backing is manufactured in many shapes and sizes for the conditions of heavy metal fabrication. These non-hygroscopic, neutral non-metallic weld backings, when properly positioned and attached to the back-side of weld joint openings, produce a condition which results in root weld free of defects. Since rework associated with poor root welds is eliminated, additional joint prep, weld and cleanup time become superfluous. Unlike metal backing bars, our non-metallic weld backing do not become part of the finished weld. Single-Sided / Single-Pass, and single sided multi-pass welds are possible with our Weld Backings Bars and Tapes, Our Backing Bars have been shown to evenly support molten weld metal over a wide range of welding heats resulting in a uniform back bead of finished quality.
The ceramic welding supports HELP enable to carry out welding from one side with full penetration with the following advantages

* No Welding on the back side.*No Gouging.* No Grinding.* No Oxidation.* No Pollution nor analysis changing in fusion bath.* No Hydrogen inclusion.* Quick execution. * Utilizable for every metal.

Code
Description
CRT.
HELP CB206
Ceramic Support CB 206. Dia. 6.0mm (Bar Length 0.5Mt.)
50Mt.
HELP CB208
Ceramic Support CB 208. Dia. 8.0mm (Bar Length 0.5Mt.)
50Mt.
HELP CB209
Ceramic Support CB 209. Dia. 9.0mm (Bar Length 0.5Mt.)
50Mt.
HELP CB210
Ceramic Support CB 210. Dia. 10mm (Bar Length 0.5Mt.)
50Mt.
HELP CB212
Ceramic Support CB 212. Dia. 12mm (Bar Length 0.5Mt.)
50Mt.
HELP CB213
Ceramic Support CB 213. Dia. 13mm (Bar Length 0.5Mt.)
50Mt.
HELP CB214
Ceramic Support CB 214. Dia. 14mm (Bar Length 0.5Mt.)
50Mt.
HELP CB216
Ceramic Support CB 214. Dia. 16mm (Bar Length 0.5Mt.)
50MT.

 

Copyright 2014 JTS-PTA ©