Tube Fit-Up Clamp
NEW from

Tube Fit-Up Clamp
Part No.
Size & Description
Price
JA 0101802
Tube Fit-Up Clamp 1/2" - 2-1/2"
$ 172.20 ea.
JA 0101803
Tube Fit-Up Clamp 1" - 4"
$ 199.00 ea.
JA 0101804
Tube Fit-Up Clamp 4" - 8"
$ 285.80 ea.
Plus GST

JA TUNGSTEN GRINDER Price
JA Tungsten Electrode Sharpener with Diamond Grinding Optimal
Welding and Cutting Quality by Means of Longitudinal Grinding The precise Longitudinal grinding when using the tungsten electrodes is a pre-request in order to archive the optimal welding quality.
By means of the highest surface quality of the tungsten electrode top, the exact repetition of the welding parameters is granted. Benefits in Longitudinal Grinding: Consistent Arc all the time, less wrist strain, less downs time, more strikes, and ect. Advantage at glance
* Cutting and grinding can be done with the same diamond grinding disc. * Optimal welding and cutting results by means of centric longitudinal grinding. * Grinding angle can be chosen free and direct from 0 - 90 deg. * No warped grinding - even not with used electrode. * Excellent contact-free ignition quality even after hundred's of ignitions. * Stable arc with best weld seam quality by means of controlled melting zones when orbital and hand welding is used. * Exact repeatability of the grinding angle to guarantee your welding parameter. * For tungsten electrodes with diameter of .040, 1/16, .080, 3/32, 1/8, 5/32, 3/16", (1.0, 1.6, 2.0, 2.4, 3.2, 4.0, 4.8mm) and lengths from .4 to 7" (10 - 175mm) in an accuracy of .0004" (0.01mm).
it's a must for any ORBITAL WELDING
* Easy to handling. Specification: Motor: 220 - 240 Volt, 5000rpm. Diamond Disc: 90mm dia. Electrode size: 1.0 - 4.8mm Electrode length: 20 - 175mm Grinding angle: 15 - 180 deg.
Weight: 9 kg.

Advantages at a glance:

Cutting and grinding can be done with the same diamond grindling disc

  • Optimal welding and cutting results by means of centrical longitudinal grinding
  • No warped grinding - even not with used electrodes
  • Excellent contact-free ignition quality even after hundreds of ignitions
  • Stable arc with best weld seam quality by means of controlled melting zones when orbital and hand welding is used
  • Exact repeatability of the grinding angle to guarantee your welding parameter
  • For tungsten electrodes with diameter from 1,0-8,0 mm and lengths of 30 mm (depends on the electodes diameter and the grinding angle) to 175 mm in an accuracy of ± 0,01 mm (0.0004") (with additional dial gauge).
  • Easy handling.

$ 2,492.00 ea. Plus GST

 
 
 
Copyright 2012 JTS-PTA ©